JXM-IO-E30

Description

The expansion module JXM-IO-E30 is the universal remote building block for mobile machinery. Thanks to its well-adjusted I/O configuration, it can take on almost any remote task and this way significantly reduce wiring expenses. The reference output lets you use standard sensors and carry out pre-processing applications.

Communication with the JXM-IO-E30 takes place via CANopen®. This allows for integration into conventional CAN networks used in mobile machinery.

The potted - and thus rugged - enclosure is applicable in any situation even under harsh environmental conditions.

Features

12 inputs and 14 diagnostics-capable outputs - including high current paths and PWM with current control
High switching capacity thanks to parallel use of outputs and high continuous total current
CAN ID addressing via tri-state inputs allows up to nine nodes in one network without software configuration, and thus supports the common part strategy
Three short-circuit-proof sensor supplies allow "mission critical" sensor networks
Rugged potted housing

Technical Data

Operating voltage	DC 8 … 32 V, with separate ECU power supply
Operating/storage temperature	-40 … +85 °C
CAN ports	1 CANopen®
Max. number of inputs/outputs	26
Inputs
Analog	8; 0 … 5 V/0 … 20 mA, can be configured individually; Resolution: 12 bits, input impedance: 35 kΩ, load resistor: 120 Ω
Digital / frequency	4 Active-high; input impedance 5.6 kΩ; 0.1 Hz ... 10 kHz
Digital / CAN-coding	2 Coding of the CAN ID, tristate
Outputs with diagnostics capability (short-circuit, no-load)
PWM, precision current measuring	4; 3 A, 1.5 kHz max., dithering, current-controlled, diagnostics capability, short-circuit proof; Alternative usage: Digital input active-low, input impedance 10 kΩ ; Digital output 3 A; PNP input
PWM	6 7 A, 1.5 kHz max., dithering, diagnostics capability, short-circuit proof; Alternative usage: Digital input active-low, input impedance 10 kΩ; Digital output 7 A; PNP input
Digital (50 % ON period)	4; 3 A high-side, diagnostics capability, short-circuit proof, (with 50 % ON period); Alternative usage: Digital input active-low, input impedance 10 kΩ; PNP input
Power supply - Sensors	3 Independent supply VBAT for sensors
Max. permitted total current	25 A
Degree of protection	IP65
Vibration	ISO 16750-3
Shock	ISO 16750-3
Protection against polarity reversal	Yes
Output diagnostics	Short circuit, no-load

JXM-IO-E30

Description

Features

Technical Data

Your contact person

Further Information

Quicklinks

Your contact person