We automate your success.

JetViewMobile 407B


With its elegant and high-quality design, the JVM-407B HMI is a standout product and can be supplied both as flush mount or surface mount model.

To the left and right of the 7" display are 10 LEDs with typical automotive warning and indicator lights which can be directly controlled independently of the electronics. This allows the JVM-407B to be used as an instrument cluster.

The integrated controller of the HMI is equipped with multi-purpose interfaces and can therefore be used as a powerful master controller for medium-size systems. A video input allows for integrating a rear view camera.

The HMI is operated via four high-value backlit keys, as well as a push encoder, i.e. a digipot used as pushbutton. The acoustic signaling device produces an alarm loud enough to be heard even in noisy surroundings. A USB port at the front side allows for simple data interchange in the field.


  • Display with built-in controller 32 bits/500 MHz
  • 3 CAN ports, Ethernet, SD card and front-side USB port
  • Video input
  • Integrated automotive LEDs
  • Elegant and high-value design
  • Available either as a flush mount or as surface mount model

Technical Data

Display 7" TFT with LED backlight
Display resolution and brightness 800 x 480 pixels (WVGA); 300 cd/m² (dimmable)
CPU iMX 35, 32 Bit, 500 MHz
Memory: RAM - Application - Non-volatile 128 MB RAM – 512 MB Flash – 128 kB MRAM
Programming Graphics: JetViewSoft - Logics: IEC61131-3 STX
Operating system WinCE 6.0
Operating voltage DC 8 … 32 V
Operating/storage temperature -20 … +65 °C/-30 … +85 °C
Ports and interfaces  
CAN 3 CANopen®, SAE J1939, ISOBUS 11783
USB 1 On front panel
SD memory card 1 On rear panel
Ethernet 1
Control elements 4 Keys, backlit; 1 Digipot used as pushbutton, backlit
Acoustic signaling 1 Buzzer; 10 LEDs with customer-specific symbols
Inputs (option)  
Digital 10 Switch input for LEDs, supply by Ub is possible; 5 Digital input active-high, input impedance 43 kΩ
Outputs (option)  
Digital 1 Peak current 3 A
RTC Yes; replaceable battery
Degree of protection Flush mount model: IP65 front/IP20 rear; Surface mount model: IP65 front/IP54 rear
Vibration DIN EN 60068-2-64, Cat. 2
Shock DIN EN 60068-2-64, 30g
Protection against polarity reversal Yes

Your contact person

Sales Department
  +49 (7141) 2550-663

Further information


Your contact person

  +49 (7141) 2550-663