JetSym - one program for control and motion system

The JetSym software tool will support you from commissioning to servicing of motion systems.

Hardware profile
A hardware profile is created quickly and conveniently. When selecting a JetMove motion system, only a name needs to be assigned; all relevant parametric data will then be defined in the programming system automatically.

Oscilloscope
With the integrated multi-channel oscilloscope, axis behavior can be monitored right down to the individual bits. Several axis parameters can be monitored in real-time and visualized for diagnostic purposes. As a result, axis behaviour can be precisely determined during a positioning run.

Motion Instructions
Whether a point-to-point motion is to be programmed or a trajectory with several axes is to be followed - the motion wizard assists you when entering commands. Pre-defined axis names will directly be provided. Every instruction will concisely show you which functions are available at that point, while incorrect inputs are prohibited.

Motion Setup
All axis parameters can be accessed online with Motion Setup. The motion setup is structured so clearly that - intuitively - you will define the correct axis parameters. During commissioning it is important that the axis is moved safely and conveniently. For this reason the determined parameters are stored on the controller and the PC at the touch of a button. Then, the drive is initialized by the controller using always the correct parameters, even when a servo amplifier has been replaced.

Diagnostics
Information on the current axis status is accessed at the click of a mouse button. All axis information - enabling, error signaling and the current axis status - is displayed immediately.